Courses:     Power Electronics

Lab Area: 100.05 Sq.m

The Power Electronics laboratory involves experiments related to power semiconductor devices’ characteristics and applications. The laboratory is well equipped with experimental trainer units for device characteristics, controlled, rectifiers, and commutations circuit trainers, choppers, inverters and motor control setups.

The laboratory is well equipped with various test and measurement instruments like cathode ray oscilloscope, power supply, function generator and digital multi meters.

Courses:  Electronic Measurement Techniques
 

Lab Area: 100.05 Sq.m

Electronic Measurement

The laboratory is well equipped with the necessary transducers and instrumentation trainers. This includes PT-100, RTD, thermocouple, thermistor, strain gauge, load cell,   linear variable differential Transformer and proximity sensors. Application of signal conditioning circuits for above measurements are demonstrated to the students on bread board, such as current to voltage converter, bridge network, instrumentation amplifier and filters. Experiments related to  D\A converter of type R/2R ladder network and binary weighted resistor n/w  are carried out to show concepts used in IC based D\A converter.

The control laboratory is well equipped with various experimental trainer units. The trainers include feedback components such as potentiometers and synchros, dc servomotor and ac servomotor trainer, linear system simulator, dc speed control system, dc position control system, temperature control system, PID controller trainer, light intensity control trainer, stepper motor control trainer, digital control trainer, compensator design setup, relay control system .The laboratory sessions are also supported by MATLAB and SIMULINK of Mathworks Corporation for analysis of control system.

Courses:  Basic Electronics

Lab Area: 100.05 Sq.m

 Analog Electronics Laboratory is well equipped with various analog trainers for experiments related to basic characteristics and applications of diodes, transistors and operational amplifiers. Various amplifier configurations and oscillators related experiments are carried out in the laboratory. There are various test and measuring instruments such as function generator, power supplies, digital multi meters, cathode ray oscilloscope and breadboard

Courses: Electronics Workshop

Lab Area: 48.72 Sq.m
               

The Laboratory is well equipped with various transducers trainers, CRO, power supplies, function generator and multi meters along with breadboards, Digital Storage Oscilloscope, Six Electronic Work bench with DSO,PS,FG,DMM,Solder iron ,Breadboard, Lcr Meter, Lcrq Bridge, Pcb Drilling Machine, Pcb Shearing Machine, Pcb Eaching Machine, Electric Oven, Exposing & Printing System, Exposing & Printing System, Arbitorary Waveform Generator

Courses: Digital Circuits & Systems, Digital Logic Design, Microcontroller & Applications, Microprocessors II 

Lab Area: 100.05 Sq.m

The laboratory is being used to support the theory course on digital circuits. Various experiments such as logic gates, combinational logic circuits and sequential logic circuits. At the end of the sessions students are given small project. Students use SSI and MSI digital ICs for performing experiments.

The microprocessor laboratory  is well equipped with  15 PCs, Microprocessors trainers, Microcontroller trainers, , Logic Analyzer, peripheral boards such as A-D Converter,D-A converter,8255(PPI), 8253( Programmable Timer), 8279( Programamble keyboard-display interface), 8257(DMA controller), 8259 (Programmable Interrupt Controller). Stepper motor study card, relay, Opto switch study card and LCD interface study card, ALU WITH POWER SUPPLYLTB824, 8051 Micro Controller Easy8051v6, Keypad Extra Development Board, 12bit Adc, 12bit Dac, Eeprom Development Board, Can Comm. Board, Rtc Board, Ethernet Board, Keil Software, Tasm Software. Universal programmer available to the students for programming microcontrollers and EPROM for their small projects.

Courses:  Electronics and Communication Engineering Project
                Basic VLSI Design, Digital Design

Lab Area: 132.25 Sq.m

Electronics and Communication Project/VLSI Laboratory is a well equipped with 14 computers, Universal Programmers, Digital Storage Oscilloscope, Analog trainers, NI-ELVIS Board, IC Tester, Complete component development system, Regulated Power Supply, Function Generator, Cathode Ray Oscilloscope, Digital Multimeter, Microcontroller based board, Fpga/Cpld Based Board,Digital Control System, Magnetic Levitation, Psoc Cy3210psoceval1-U Kit, Arm Controller Kit, Agilent Workbench(Dso3062a60mhz, 34405a Dmm 5.5 Digit,U3000a Elec. Instru. Trining Kit,33220a 20 Mhz Function Generator,E3631a Dc Power Supply,W1141b  Vee 8.5 Software,82357b    Usb/Gpib Interface,Dso, Ic Tester, Superpro IC Programmer,15 Nos of Spartan3 XC3s100E Xilinx Basys2 Kits, Arm Controller kit BME 2368, Arm Cortex Eval Lpc1114, Wireless Sensor Network St108ni Elvis-Ii, Ni Defpga, Quanser Qnet Rotary Inverter Pendulum, Mechatronics Senser., NI My DAQ with Labview&Multisim Student edition, Dev Kit 8000 omap3530 Eval. Kit. Softwares Like MATLAB Simulink,signal pro.,Image Pro., DSP,Communication tool box ,Matlab Coder,Simulink coder, Embedded Coder (10 USERS),Labview 8.0, Altera Quartus II 6.0,Xilinx 9.2i,Microwind 3.0,Multisim 10,Ultiboard 10, PSoC® Designer 4.4are available in this laboratory.
Students selects the project and under the supervision of faculty members and execute the same over a period of two semesters.  

Basic VLSI Design

In Basic VLSI Design course, students implement the logic related to digital circuit design in VHDL (Very High Speed Integrated Circuits Hardware Description Language) in software and then implement it on Kit using suitable data cables and peripherals like JTAG. The laboratory contains the implementation of different logic gates, 4:1 multiplexer, 4:1 MUX using tri-state buffers, full adder / substractor, odd-parity generator and checker, flip flops, BCD-EXCESS 3 code conversion, Linear Feedback Shift Register and more digital ckts in VHDL code and implementation on kit using Xlinx and Altera Quartus II 6.0 software. The laboratory contains 2-CPLD trainer kits by Altera, 3-CPLD trainer kit by Xilinx XC9572, 2 FPGA trainer kits by Altera EP1K30QC208, ---2-FPGA trainer kits by Xilinx XC2S50PQ208C. 2-FPGA trainer kits DCF00301102004,3-DSP DSP trainer (Xilinx -XC3S400),3-Altera DE-I,3-DE-II2,CY3209Express EVK , 2-CY3210PSoCEVal1-U.(courtesy Cypress Microsystems(USA)),

Courses:   Analog & Digital Communication
                Communication Systems III
                Optical Fiber Communication

Lab Area: 239.20 Sq.m

This Laboratory involves experiments for third and final level students on analog and digital communication and optical fiber communication. The laboratory is equipped with analog and digital communication trainers for studying modulations, transmission and reception of information signals. The lab has telephone trainers, television trainer, EPX-2000 FALCON,EPABX Trainer Kits (Vinytics), AM-FM Trainer Kit, Pulse Modulation Trainers, Sampling & Reconstruction Circuit Trainer Kit, TDM Pulse Modulation Demodulation Trainer Kit, TDM PCM Transmitter Trainer Kit, TDM PCM Receiver Trainer Kit, Delta Adaptive Delta Sigma Mod/Demod Kit, Data Formatting & Career Modulation transmitter Kit, Career Demodu.& Data Reformatting Receiver Kit, Audio Input / Output Module, PAM PPM PWM Mod / Demod Trainer Kit, DSB / SSB AM Transmitter / Receiver Trainer Kit, FM Transmitter & Receiver Trainer Kit, Digital Modulation Trainers to demonstrate various concepts of communication with applications. For optical fiber study, the laboratory is well equipped with transmitter-receiver kits with LED and Laser as sources., Satellite Trainer, Base Band TransmitterST2134, GSM Application ModuleST2133AM, Basic GSM Trainer ST2133

The lab is equipped with various test and measuring instruments like Cathode Ray Oscilloscopes, function generators, spectrum analyzer, Digital Storage Scope, optical power meter, field power meter.

Courses:  Wave Propagation & Antenna, Microwave Engineering

Lab Area: 239.20 Sq.m

Wave Propagation & Antenna , Microwave Engineering Laboratory

This Laboratory involves experiments for third and final level students on antenna systems, microwave engineering. The laboratory is equipped with computerized antenna trainers having different antennas to study their radiating patterns, transmission and reception of information signals. A microwave test bench is used perform various experiments for the course.

Physics Laboratory

Courses:  Digital Signal Processing
                Digital Image Processing

Lab Area: 132.25 Sq. m

Digital Signal Processing

For the course on digital signal processing various signal processing operations are performed using MATLAB® with signal processing toolbox. Emulations can be done using DSP Starter Kit which are TMS320C5416,TMS320C6711 and TMS320C6713. This lab is equipped with 40 computers and 1 server. Embedded tool kit of Labview 8.0 is used to process various digital signals.

Digital Image Processing

This course involves experiments for final year students on digital image processing. The course is a challenging mixture of mathematical theory and practical implementation issues. In practical session various algorithms such as negative of an image, arithmetic and logical operators , mirror of an image , thresolding of an image , histogram processing and histogram equalization ,low pass filter, high pass filter ,median filter are implemented in C language.
This laboratory has OPTSIM 5.0   6 users software used for simulation of advance optical network & components.

This laboratory has Spice Creator 10 users software for Digital, Analog & mixed schematic Design & Circuit Simulations.

This laboratory has Circuit Creator 10 users software for schematic capture & PCB design & Layout

A well prepared manual is made available to students for ready reference.
Department keeps on upgrading the laboratory at regular interval to cope up with relevant advancement occurring in the field.

This laboratory has 18 Nos. of  Acer Veriton Corei3530,2.93Ghz,500GB,4GBDDRIII Computer with MATLAB Software for  Signal Processing and  Communication PG course.